PK 100/7/5,00-H GN

Product information:
PCB terminal, Wire protection, No. of poles: 7, Width: 35.7 mm, Colour: Green
Product number: 10017.1
GTIN (EAN): 4044211000394
Colour
Quantity:
General
Packaging unit: 50
Quantity unit: PC
Packaging type: Carton
Type of banding: Without
Weight per piece (not including packaging): 8 g
Weight per piece (including packaging): 8.6 g
Unit of weight: G
Customs number: 85369010
Country of origin: QU
Prio-Article: 10017.1
Dimensions
Length: 12.5 mm
Length of the pin: 3.8 mm
Width: 35.7 mm
Width left: 3.2 mm
Width right: 2.5 mm
Height: 9 mm
Drill hole diameter: 1.3 mm
Diameter of connecting pin: 1 mm
Pitch: 5 mm
Ratings
Rated voltage: 250 V
Rated current: 24 A
Rated cross-section: 2.5 mm²
Rated impulse voltage: 2 kV
Overvoltage category: III
Contamination degree: 3
Connection data
Connection principle: Wire protection
Connection type of PCB: Solder connection
Type of attachment to circuit board: Connecting contact
Angle of PCB/wire connection: 90° (vertically upwards)
No. of poles: 7
Number of levels: 1
Wire cross-section single-core (rigid) / stranded, min.: 0.2 mm²
Wire cross-section single core (rigid)/stranded, max.: 2.5 mm²
Wire cross-section stranded, min.: 0.2 mm²
Wire cross-section stranded, max.: 2.5 mm²
Wire cross-section stranded with wire-end ferrules, min.: 0.2 mm²
Wire cross-section stranded with wire-end ferrules, max.: 2.5 mm²
Wire cross-section AWG, min.: 22
Wire cross-section AWG, max.: 12
Stripping length: 6 mm
Screw threading: M 3
Torque: 0.5 Nm
Materials
Insulation housing: Polyamide 6.6
Flammability class UL 94: V-0
Working temperature, min.: -30 °C
Working temperature, max.: 105 °C
Clamping element: Brass
Screws: Steel
Wire protection: Stainless steel
Further technical data
Storage temperature, min.: -40 °C
Storage temperature, max.: 105 °C
Insulation resistance: 1*10^13 Ohm x cm
Creepage-current resistance: CTI 600
Glow wire flammability index GWFI: GWFI 850
GWFI after-glow time: 30 Sek.
Glow wire ignition temperature GWIT: GWIT 775 °C
GWIT exposure time: 5 Sek.
Connection cycles, in compliance with standard: 5
Recommended wave soldering temperature: 265 °C
Recommended wave soldering duration, min.: 3 Sek.
Recommended wave soldering duration, max.: 4 Sek.
Environmental Product Compliance
REACH Conform: No
REACH Reference date: 2024-01-23
REACH Candidate Substance Note: No
REACH CAS 1 Substance: LEAD
REACH CAS 1 Percent minimal: 0.1 %
REACH CAS 1 Percent maximum: 4 %
REACH CAS 1 Number: 7439-92-1
RoHS Conform: yes
RoHS Exception rule: 6c
cUL Recognized
cUL approval: CSA 22.2 No.158
cUL Usegroup B: rated voltage: 300 V
cUL Usegroup B: rated current: 20 A
cUL Usegroup D: rated voltage: 300 V
cUL Usegroup D: rated current: 10 A
cUL wire cross-section single-core (rigid) AWG, min.: 22
cUL wire cross-section single-core (rigid) AWG, max.: 12
cUL wire cross-section stranded AWG, min.: 12
cUL wire cross-section stranded AWG, max.: 22
cUL torque: 0.4499999881 Nm
cUL wire material: Cu
cUL Recognized:
UL Recognized
UL approval: UL 1059
UL Usegroup B: rated voltage: 300 V
UL Usegroup B: rated current: 20 A
UL Usegroup D: rated voltage: 300 V
UL Usegroup D: rated current: 10 A
UL wire cross-section single-core (rigid) AWG, min.: 22
UL wire cross-section single-core (rigid) AWG, max.: 12
UL wire cross-section stranded AWG, min.: 12
UL wire cross-section stranded AWG, max.: 22
UL torque: 4 Lb In
UL wire material: Cu
UL factory wiring:
UL field wiring:
UL Recognized:
VDE approval
VDE approval: DIN EN 60998
VDE approval granted:
VDE rated voltage: 250 V
VDE rated current: 24 A
VDE rated current wire cross-section rigid, max.: 24 A
VDE rated current wire cross-section stranded, max.: 24 A
VDE rated impulse voltage: 2 kV
VDE wire cross-section rigid, min.: 0.5 mm²
VDE wire cross-section rigid, max.: 2.5 mm²
VDE wire cross-section stranded, min.: 0.5 mm²
VDE wire cross-section stranded, max.: 2.5 mm²
VDE screw threading: M 3
VDE torque: 0.5 Nm
VDE overvoltage category: III
VDE contamination degree: 3