Clip-on base system
Extruded profiles can be used for the main holders of printed circuit boards. The profiles have one or two PCB levels and are delivered in two-meter lengths. They can be easily shortened with a saw to the correct length. Naturally, we will also deliver the profiles according to your requirements. The profile can be shortened freely, without rigid pitch divisions. The individual fit of the enclosure profile to the electronics is thus guaranteed.
Clip-on base system at a glance
Sorting:
AP 0/TS OG
Art.-Nr.: 3133.3
End plate with snap-in mounting foot for locking base system RS-SP 0, colour: orange. Enables profile to be mounted on Mounting rail TS 35 DIN rail, colour: orange
RS-SP 0 2000 mm OG
Art.-Nr.: 5675.3
Extruded profile for locking base system, length: 2000 mm, lower part, width: 46.5 mm, width of PCB: 42.5 mm, colour: orange, Note: required profile length = PCB length - 4 mm
RS-SP 1 2000 mm OG
Art.-Nr.: 5680.3
Extruded profile for locking base system, length: 2000 mm, lower part, width: 84 mm, PCB width: 68 or 73 mm,, colour: orange, Note: required profile length = PCB length - 4.5 mm
AP 1/TS OG
Art.-Nr.: 5681.3
End plate for locking base system RS-SP 1, closes the profile when mounted with mounting foot for DIN rails, colour: orange
RF SP 1 OG
Art.-Nr.: 5683.3
Mounting foot for locking base system RS-SP 1, Enables profile to be mounted to Mounting rail TS 35 and TS 32 DIN rails, colour: orange
RS-SP 2 2000 mm OG
Art.-Nr.: 5690.3
Extruded profile for locking base system, length: 2000 mm, lower part, width: 119 mm, PCB width: 100 or 108 mm, colour: orange, Note: required profile length = PCB length - 4.5 mm
AP 2/TS OG
Art.-Nr.: 5691.3
End plate for locking base system RS-SP 2, closes the profile when mounted with mounting foot for DIN rails, colour: orange
RF SP 2 OG
Art.-Nr.: 5693.3
Mounting foot for locking base system RS-SP 2, Enables profile to be mounted to Mounting rail TS 35 and TS 32 DIN rails, colour: orange
AD 1/1000 mm
Art.-Nr.: 5893.0
Cover for locking base system RS-SP 1, height: 25.3 mm, mounted with mounting screws, colour: transparent
AD 2/1000 mm
Art.-Nr.: 5894.0
Cover for locking base system RS-SP 1, height: 44.3 mm, mounted with mounting screws, colour: transparent
