PK 250/8/5,08-V GN
Product information:
PCB terminal, Screw connection, No. of poles: 8, Width: 41.24 mm, Colour: Green
Product number:
10297.1
GTIN (EAN):
4044211006617
Quantity:
| General | |
|---|---|
| Packaging unit: | 50 |
| Quantity unit: | PC |
| Packaging type: | Carton |
| Type of banding: | Without |
| Weight per piece (not including packaging): | 7.2 g |
| Weight per piece (including packaging): | 7.71 g |
| Unit of weight: | G |
| Customs number: | 85369010 |
| Country of origin: | TN |
| Prio-Article: | 10297.1 |
| Dimensions | |
|---|---|
| Length: | 8.1 mm |
| Length of the pin: | 3.5 mm |
| Width: | 41.24 mm |
| Width left: | 3.14 mm |
| Width right: | 2.54 mm |
| Height: | 10 mm |
| Drill hole diameter: | 1.3 mm |
| Diameter of connecting pin: | 0.9 mm |
| Pitch: | 5.08 mm |
| Ratings | |
| Rated voltage: | 250 V |
| Rated current: | 13 A |
| Rated cross-section: | 1.5 mm² |
| Rated impulse voltage: | 2 kV |
| Overvoltage category: | III |
| Contamination degree: | 3 |
| Connection data | |
| Connection principle: | Screw connection |
| Connection type of PCB: | Solder connection |
| Type of attachment to circuit board: | Connecting contact |
| Angle of PCB/wire connection: | 0°/180° (horizontal) |
| No. of poles: | 8 |
| Number of levels: | 1 |
| Wire cross-section single-core (rigid) / stranded, min.: | 0.14 mm² |
| Wire cross-section single core (rigid)/stranded, max.: | 1.5 mm² |
| Wire cross-section stranded, min.: | 0.14 mm² |
| Wire cross-section stranded, max.: | 1.5 mm² |
| Wire cross-section stranded with wire-end ferrules, min.: | 0.25 mm² |
| Wire cross-section stranded with wire-end ferrules, max.: | 1.5 mm² |
| Wire cross-section AWG, min.: | 28 |
| Wire cross-section AWG, max.: | 14 |
| Stripping length: | 6 mm |
| Screw threading: | M 3 |
| Torque: | 0.5 Nm |
| Materials | |
| Insulation housing: | Polyamide 6.6 |
| Flammability class UL 94: | V-0 |
| Working temperature, min.: | -30 °C |
| Working temperature, max.: | 105 °C |
| Clamping element: | Brass |
| Screws: | Steel |
| Soldering lug: | Bronze |
| Further technical data | |
| Storage temperature, min.: | -40 °C |
| Storage temperature, max.: | 105 °C |
| Insulation resistance: | 1*10^13 Ohm x cm |
| Creepage-current resistance: | CTI 600 |
| Glow wire flammability index GWFI: | GWFI 850 |
| GWFI after-glow time: | 30 Sek. |
| Glow wire ignition temperature GWIT: | GWIT 775 °C |
| GWIT exposure time: | 5 Sek. |
| Connection cycles, in compliance with standard: | 5 |
| Recommended wave soldering temperature: | 265 °C |
| Recommended wave soldering duration, min.: | 3 Sek. |
| Recommended wave soldering duration, max.: | 4 Sek. |
| Environmental Product Compliance | |
| REACH Conform: | No |
| REACH Reference date: | 2024-01-23 |
| REACH Candidate Substance Note: | No |
| REACH CAS 1 Substance: | LEAD |
| REACH CAS 1 Percent minimal: | 0.1 % |
| REACH CAS 1 Percent maximum: | 4 % |
| REACH CAS 1 Number: | 7439-92-1 |
| RoHS Conform: | yes |
| RoHS Exception rule: | 6c |
| cUL Recognized | |
|---|---|
| cUL approval: | C22.2 No 158 |
| cUL Usegroup B: rated voltage: | 300 V |
| cUL Usegroup B: rated current: | 15 A |
| cUL Usegroup C: rated voltage: | 300 V |
| cUL Usegroup C: rated current: | 15 A |
| cUL Usegroup D: rated voltage: | 300 V |
| cUL Usegroup D: rated current: | 15 A |
| cUL wire cross-section single-core (rigid) AWG, min.: | 28 |
| cUL wire cross-section single-core (rigid) AWG, max.: | 14 |
| cUL wire cross-section stranded AWG, min.: | 28 |
| cUL wire cross-section stranded AWG, max.: | 14 |
| cUL torque: | 0.5 Nm |
| cUL wire material: | Cu |
| cUL Recognized: | |
| UL Recognized | |
| UL approval: | UL 1059 |
| UL Usegroup B: rated voltage: | 300 V |
| UL Usegroup B: rated current: | 15 A |
| UL Usegroup C: rated voltage: | 300 V |
| UL Usegroup C: rated current: | 15 A |
| UL Usegroup D: rated voltage: | 300 V |
| UL Usegroup D: rated current: | 15 A |
| UL wire cross-section single-core (rigid) AWG, min.: | 28 |
| UL wire cross-section single-core (rigid) AWG, max.: | 14 |
| UL wire cross-section stranded AWG, min.: | 28 |
| UL wire cross-section stranded AWG, max.: | 14 |
| UL torque: | 4.43 Lb In |
| UL wire material: | Cu |
| UL factory wiring: | |
| UL field wiring: | |
| UL Recognized: | |
| VDE approval | |
| VDE approval: | DIN EN 60998 |
| VDE approval granted: | |
| VDE rated voltage: | 250 V |
| VDE rated current: | 13 A |
| VDE rated current wire cross-section rigid, max.: | 13 A |
| VDE rated current wire cross-section stranded, max.: | 13 A |
| VDE rated impulse voltage: | 2 kV |
| VDE wire cross-section rigid, min.: | 0.5 mm² |
| VDE wire cross-section rigid, max.: | 1.5 mm² |
| VDE wire cross-section stranded, min.: | 0.5 mm² |
| VDE wire cross-section stranded, max.: | 1.5 mm² |
| VDE screw threading: | M 3 |
| VDE torque: | 0.5 Nm |
| VDE overvoltage category: | III |
| VDE contamination degree: | 3 |
