PKB 130/2/5,00-BL GN
Product information:
Female socket block, Wire protection, No. of poles: 2, Width: 10 mm, Colour: Green
Product number:
11185.1
GTIN (EAN):
4044211018344
Quantity:
General | |
---|---|
Connector version: | Free connector |
Packaging unit: | 50 |
Quantity unit: | PC |
Packaging type: | Carton |
Type of banding: | Without |
Weight per piece (not including packaging): | 1.83 g |
Weight per piece (including packaging): | 2.23 g |
Unit of weight: | G |
Customs number: | 85366930 |
Country of origin: | TN |
Prio-Article: | 11185.1 |
Dimensions | |
---|---|
Length: | 10.8 mm |
Width: | 10 mm |
Width left: | 2.5 mm |
Width right: | 2.5 mm |
Height: | 13.5 mm |
Pitch: | 5 mm |
Ratings | |
Rated voltage: | 250 V |
Rated current: | 7 A |
Rated cross-section: | 1.5 mm² |
Rated impulse voltage: | 4 kV |
Overvoltage category: | III |
Contamination degree: | 3 |
Connection data | |
Connection principle: | Wire protection |
Angle of wire connection/contact: | 0°/180° (horizontal) |
Number of plug-in rows: | 1 |
No. of poles: | 2 |
Contact version: | Female connector |
Wire cross-section single-core (rigid) / stranded, min.: | 0.14 mm² |
Wire cross-section single core (rigid)/stranded, max.: | 2.5 mm² |
Wire cross-section stranded, min.: | 0.14 mm² |
Wire cross-section stranded, max.: | 1.5 mm² |
Wire cross-section stranded with wire-end ferrules, min.: | 0.14 mm² |
Wire cross-section stranded with wire-end ferrules, max.: | 1.5 mm² |
Wire cross-section AWG, min.: | 22 |
Wire cross-section AWG, max.: | 14 |
Stripping length: | 6 mm |
Screw threading: | M 2,6 |
Torque: | 0.4 Nm |
Materials | |
Insulation housing: | Polyamide 6.6 |
Flammability class UL 94: | V-0 |
Working temperature, min.: | -30 °C |
Working temperature, max.: | 105 °C |
Clamping element: | Brass |
Contact spring: | Copper alloy |
Screws: | Steel |
Further technical data | |
Storage temperature, min.: | -40 °C |
Storage temperature, max.: | 105 °C |
Insulation resistance: | 1*10^13 Ohm x cm |
Creepage-current resistance: | CTI 600 |
Glow wire flammability index GWFI: | GWFI 850 |
GWFI after-glow time: | 30 Sek. |
Glow wire ignition temperature GWIT: | GWIT 775 °C |
GWIT exposure time: | 5 Sek. |
Connection cycles, in compliance with standard: | 5 |
Plug-in cycles acc. to standard: | 100 |
Environmental Product Compliance | |
REACH Conform: | No |
REACH Reference date: | 2024-06-27 , 2024-06-27 |
REACH Candidate Substance Note: | No |
REACH CAS 1 Substance: | LEAD |
REACH CAS 1 Percent minimal: | 0.1 % |
REACH CAS 1 Percent maximum: | 4 % |
REACH CAS 1 Number: | 7439-92-1 |
RoHS Conform: | yes |
RoHS Exception rule: | 6c |
cUL Recognized | |
---|---|
cUL approval: | CSA 22.2 No.158 |
cUL Usegroup B: rated voltage: | 300 V |
cUL Usegroup B: rated current: | 8 A |
cUL Usegroup C: rated voltage: | 150 V |
cUL Usegroup C: rated current: | 8 A |
cUL Usegroup D: rated voltage: | 300 V |
cUL Usegroup D: rated current: | 8 A |
cUL wire cross-section single-core (rigid) AWG, min.: | 22 |
cUL wire cross-section single-core (rigid) AWG, max.: | 14 |
cUL wire cross-section stranded AWG, min.: | 22 |
cUL wire cross-section stranded AWG, max.: | 14 |
cUL torque: | 0.45 Nm |
cUL wire material: | Cu |
cUL Recognized: | |
UL Recognized | |
UL approval: | UL 1059 |
UL Usegroup B: rated voltage: | 300 V |
UL Usegroup B: rated current: | 8 A |
UL Usegroup C: rated voltage: | 150 V |
UL Usegroup C: rated current: | 8 A |
UL Usegroup D: rated voltage: | 300 V |
UL Usegroup D: rated current: | 8 A |
UL wire cross-section single-core (rigid) AWG, min.: | 22 |
UL wire cross-section single-core (rigid) AWG, max.: | 14 |
UL wire cross-section stranded AWG, min.: | 22 |
UL wire cross-section stranded AWG, max.: | 14 |
UL torque: | 4 Lb In |
UL wire material: | Cu |
UL factory wiring: | |
UL field wiring: | |
UL Recognized: | |
VDE approval | |
VDE approval: | DIN EN 61984 |
VDE approval granted: | |
VDE rated voltage: | 250 V |
VDE rated current: | 7 A |
VDE rated current wire cross-section rigid, min.: | 5 A |
VDE rated current wire cross-section rigid, max.: | 7 A |
VDE rated current wire cross-section stranded, min.: | 5 A |
VDE rated current wire cross-section stranded, max.: | 7 A |
VDE rated impulse voltage: | 4 kV |
VDE wire cross-section rigid, min.: | 0.5 mm² |
VDE wire cross-section rigid, max.: | 2.5 mm² |
VDE wire cross-section stranded, min.: | 0.5 mm² |
VDE wire cross-section stranded, max.: | 1.5 mm² |
VDE screw threading: | M 2,6 |
VDE torque: | 0.4 Nm |
VDE overvoltage category: | III |
VDE contamination degree: | 3 |