PK 2,5/1/5,00 GN
Product information:
PCB terminal, Screw connection, No. of poles: 1, Width: 7.5 mm, Colour: Green
Product number:
5001.1
GTIN (EAN):
4044211065195
Quantity:
General | |
---|---|
Packaging unit: | 100 |
Quantity unit: | PC |
Packaging type: | Carton |
Type of banding: | Without |
Weight per piece (not including packaging): | 1.91 g |
Weight per piece (including packaging): | 2.21 g |
Unit of weight: | G |
Customs number: | 85369010 |
Country of origin: | CZ |
Prio-Article: | 5001.1 |
Dimensions | |
---|---|
Length: | 12 mm |
Length of the pin: | 4.5 mm |
Width: | 7.5 mm |
Width left: | 2.5 mm |
Width right: | 5 mm |
Height: | 20 mm |
Drill hole diameter: | 1.3 mm |
Pitch: | 5 mm |
Ratings | |
Rated voltage: | 250 V |
Rated current: | 16 A |
Rated cross-section: | 2.5 mm² |
Rated impulse voltage: | 4 kV |
Overvoltage category: | III |
Contamination degree: | 3 |
Connection data | |
Connection principle: | Screw connection |
Connection type of PCB: | Solder connection |
Type of attachment to circuit board: | Connecting contact |
Angle of PCB/wire connection: | 0°/180° (horizontal) |
No. of poles: | 1 |
Number of levels: | 1 |
Wire cross-section single-core (rigid) / stranded, min.: | 0.2 mm² |
Wire cross-section single core (rigid)/stranded, max.: | 4 mm² |
Wire cross-section stranded, min.: | 0.2 mm² |
Wire cross-section stranded, max.: | 2.5 mm² |
Wire cross-section stranded with wire-end ferrules, min.: | 0.2 mm² |
Wire cross-section stranded with wire-end ferrules, max.: | 2.5 mm² |
Wire cross-section AWG, min.: | 24 |
Wire cross-section AWG, max.: | 14 |
Stripping length: | 7 mm |
Screw threading: | M 2,5 |
Torque: | 0.6 Nm |
Materials | |
Insulation housing: | Polyamide 6.6 |
Flammability class UL 94: | V-2 |
Working temperature, min.: | -30 °C |
Working temperature, max.: | 105 °C |
Clamping element: | Steel |
Screws: | Steel |
Soldering lug: | Copper |
Further technical data | |
Storage temperature, min.: | -40 °C |
Storage temperature, max.: | 105 °C |
Insulation resistance: | 1*10^12 Ohm x cm |
Creepage-current resistance: | CTI 600 |
Glow wire flammability index GWFI: | GWFI 960 |
GWFI after-glow time: | 30 Sek. |
Glow wire ignition temperature GWIT: | GWIT 775 °C |
GWIT exposure time: | 5 Sek. |
Recommended wave soldering temperature: | 260 °C |
Recommended wave soldering duration, min.: | 3 Sek. |
Recommended wave soldering duration, max.: | 4 Sek. |
Environmental Product Compliance | |
REACH Conform: | yes |
REACH Reference date: | 2023-06-14 , 2024-01-23 |
REACH Candidate Substance Note: | No |
RoHS Conform: | yes |
CSA approval | |
---|---|
CSA approval: | CSA 22.2 No.158 |
CSA approval granted: | |
CSA Usegroup B: rated voltage: | 300 V |
CSA Usegroup B: rated current: | 20 A |
CSA wire cross-section AWG, min.: | 24 |
CSA wire cross-section AWG, max.: | 14 |
CSA stripping length: | 7 mm |
CSA torque: | 0.6 Nm |